Servo constant pressure high pressure outlet system

20 bar/30 bar self-priming center-outlet

Applicable fluids: Emulsifiable cutting fluids, semi-synthetic cutting fluids Motor power: 1.5 kW, 50 Hz (AC 220/380 V)

20bar/30bar tank-type central water outlet

Applicable fluids: Emulsifiable cutting fluids, semi-synthetic cutting fluids, and fully synthetic cutting fluids.

30-bar tank-type central water outlet

Applicable fluids: Emulsifiable cutting fluids, semi-synthetic cutting fluids Motor power: 2.2 kW, 50 Hz (AC 220/380 V) System pressure: 30 bar

Comparison of Removal Rates for Water and Oil in JN-70

When JN-70 is used with viscous liquids such as cutting oils, its removal rate is lower than that for water. However, in the case of a cutting oil with a viscosity of 5 cSt and a particle size of 20 μm, the removal rate can reach as high as 80%.

50-bar tank-type central water outlet

Applicable fluids: Emulsifiable cutting fluids, semi-synthetic cutting fluids Motor power: 3.75 kW, 50 Hz (AC 220/380 V) System pressure: 50 bar

50 bar fully enclosed tank-type central water outlet

Applicable fluids: Emulsifiable cutting fluids, semi-synthetic cutting fluids Motor power: 3.75 kW, 50 Hz (AC 220/380 V) System pressure: 50 bar

50-bar tank-type central water outlet

Applicable fluids: Emulsifiable cutting fluids, semi-synthetic cutting fluids, fully synthetic cutting fluids Motor power: 2 × 3 kW, 50 Hz (AC 220/380 V) System pressure: 50 bar

70 bar tank-type central water outlet

Applicable fluids: Emulsifiable cutting fluids, semi-synthetic cutting fluids, fully synthetic cutting fluids Motor power: 4 kW, 50 Hz (AC 220/380 V) System pressure: 70 bar
< 1 > proceed page